Vacuum Porcelain Furnace
CE_Standard BR-Run dental porcelain furnace
BR-Run dental porcelain furnace applies auto lift and down tray with non-oil vacuum pump design, it is suitable for all kinds of ceramic powder materials, such as Vita In-Ceramics, Shanghai Jade Crowns, etc., and owns fellowing characteristics.
1. Max temperature: 1200℃
2. Working temperature: 1100℃
3. Automatic program for heating, platform moving.
4. Touch screen LED panel which has been stored 100pcs porcelain programs
5. Kanthal A1 wire protected by quartz tube, avoid the porcelain clinged on the wire after long time using.
6. Be suitabel for all kinds of porcelain cements (VITA In-Ceram®,etc).
7. Super anti-power jamming capabilities, can bear instantly to 94V-264V;
8. High accuracy temperature controller can achieve +/-1℃. When 920℃ heat preservation,
9. The temperature has no obvious overshoot phenomenon.
10. Night heat preservation function, Power loss only 10W/H.
11. Simple operation, low noise, suitable for various factory, clinics and hospital;
● BR-1430 type high purity Japanese Imported ceramic fibre insulation (energy saving 40% and weight lighter about 30% than old furnace)
● Vacuum line multi-layer filter structure design, guarantee the stability and longevity of the related components.
LED touch screen control panel
AC 220V 50/60 Hz single phase (or according to your standard)
1200℃ (< 2 hours)
Continuous work temp.
0-1000℃ (can be good keeping warm at 920deg.c)
Max. Heating Rate
-97KPa with oilless vacuum pump
Touch screen panel which has been stored 100pcs porcelain programs
Kanthal A1 wire protected by quartz tube, avoid the porcelain clinged on the wire after long time using.
Night heat preservation function
|Can be keeping warm at 300deg.c at night, the power loss |
1 year limited warranty (Consumable parts such as thermocouple, and heating elements are not covered by the warranty, please order the replacements at related products below.)