25L Vacuum Drying Oven
1. Radiant warm wall heating system provides optimal uniformity and conserves chamber space for drying, curing, vacuum embedding, and plating applications.
2. 3" (7.6 cm) glass wool insulation prevents heat loss from working chamber
3. Silicone door gasket and positive latch door maintain seal at all vacuum levels
4. Exclusive polycarbonate safety shield protects door glass
5. Digital temperature controller with +/- 1℃ accuracy.
6. Maximum Heating Rate: 4~6 ℃/min
7. Vacuum fittings require .25" (6.35 mm) I.D. tubing
8. Easy-to-clean #304 stainless steel chamber interior
9. 2 shelves were included for immediate use
10. Vacuum and air lines constructed with corrosion-resistant stainless steel tubing for optimum chamber cleanliness and long term performance.
11. CE certificated
12. One year limited warranty
13. A vacuum pump required to operate the oven, please order separately
14. One stage pump: < 2 Torr
15. Two stage pump: < 900 m-torr
Operating temperature range from room temperature to 250℃ Max.(RT ~ 200℃ for continuous; 200℃ ~ 250℃ for <4hrs)
Vacuum level displayed on gauges from 0 to 30" Hg
PID precision Digital Power controller controls temperature with a uniformity of +/-3℃ @ 100℃; 25" Hg at center hot zone, e.g 6'x6' center area only) and built-in over temperature protection
For using under vacuum, it is necessary to have the vacuum pump, Please order our two stage vacuum pump
Ⅰ. Technical Specifications
300X275X300mm (Width*Height * Depth)
250 ℃ (<4hour)
PID precision Digital Power controller and built-in over temperature protection
±3℃ over 80 mm @ 100℃
Electric heating pipe
High quality Aluminum silicate fibers
Easy-to-clean #304 stainless steel
● Radiant warm wall heating system provides optimal uniformity and conserves chamber space for drying, curing, vacuum embedding, and plating applications.
Vacuum fittings require. 25" (6.35 mm) I.D. tubing
110V or 220V, 50HZ/60HZ, 1 phases (As per your order)
Net Weight: about 30kgs
● One year limited warranty with lifetime support. (Consumable parts such as heating elements and crucibles are not covered by the warranty, please order the replacement at related products)
Ⅱ. Application Notes
● Cooling rate shall also not exceed 10℃ /min.